Custom Air Intake (56k Lol) New filter pics
#6
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Looks good Where'd you get the parts for that & which filter do you have on there? I want to get rid of my gutted airbox when the weather warms up some.
Ed
Ed
#8
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Oct 2005
Location: Woodbridge, Va
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Yes, the hole is in front of the charcoal canister. I had to
cut a 4"wide hole about 3"* below/ out from and above the crease.
The filter is a K&N RX-4750 cone filter which was recommended
by the guru'* here. I used two rice pipes 1 I bought and 1 donated
by a friend who had 1 sittin in his garage. At first I was going to
do the rice pipe w/ a heat shield, but after the donation I came
up w/ this idea. One rice pipe is intact and the other i had to cut
about 6"* off using the end w/ the 45* bend. I wanted to make
sure the filter was behind/below the head light and tucked above
the splash guard to try to prevent water saturation as much as
possible . The rice pipe ends up coming out behind the head light
w/ the 45* angle pointing down and towards the front driverside corner.
IAT extender used...
I will get some pics of the filter location and hole location and post this weekend...
cut a 4"wide hole about 3"* below/ out from and above the crease.
The filter is a K&N RX-4750 cone filter which was recommended
by the guru'* here. I used two rice pipes 1 I bought and 1 donated
by a friend who had 1 sittin in his garage. At first I was going to
do the rice pipe w/ a heat shield, but after the donation I came
up w/ this idea. One rice pipe is intact and the other i had to cut
about 6"* off using the end w/ the 45* bend. I wanted to make
sure the filter was behind/below the head light and tucked above
the splash guard to try to prevent water saturation as much as
possible . The rice pipe ends up coming out behind the head light
w/ the 45* angle pointing down and towards the front driverside corner.
IAT extender used...
I will get some pics of the filter location and hole location and post this weekend...
#9
Senior Member
True Car Nut
I'm liking it.... Can't wait to see the filter. It should be interesting trying to get good pictures up under there, lol. And for posterities sake:
I know you will get them this weekend, but had too...
I know you will get them this weekend, but had too...