AWD bonne...
#1
Senior Member
Posts like a Camaro
Thread Starter
AWD bonne...
Just kinda tossing this one out, probably not a bolt on though.... How about the AWD system out of an Astro or typhoon/cyclone? Or some other independent rear suspension (no solid axles). What are some AWD systems that have the engine facing east/west in the engine bay? It'd be a heck of a project.
#2
Senior Member
Certified Car Nut
The chassis isn't designed to take it, there'* no tunnel so it'd be hanging low, you'd have to reroute exhaust, etc. Not even talking about custom rear suspension, new driveshafts for the rear end you use, etc...
Best bet would be to scrap the system from a 6000 STE AWD car...
Best bet would be to scrap the system from a 6000 STE AWD car...
#4
Senior Member
Posts like a Camaro
Thread Starter
Originally Posted by BonneMeMN
Best bet would be to scrap the system from a 6000 STE AWD car...
#5
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chadow427
Originally Posted by BonneMeMN
Best bet would be to scrap the system from a 6000 STE AWD car...
This page has a ton of good info on the AWD STE but its a geocities so it'* only availible when ever it wants to be:
http://www.geocities.com/ste86sc3800/6000awd.html
The transmission itself is real weak but all of the other components (drive shaft, rear, etc.) were built to handle more abuse. The rear suspension was also designed to have 4 wheel steering.
www.a-body.net has a good amount of info on them.
As far as the tunnel goes.. even if it was big enough the rear of a bonnie would need some major customizing.
#6
Senior Member
Posts like a Camaro
Thread Starter
Originally Posted by 95naSTA
As far as the tunnel goes.. even if it was big enough the rear of a bonnie would need some major customizing.
What kinda motor does the 6000 have?