Ordered my Jet Chip (order cancelled, no longer made by jet)
#3
Senior Member
Certified Car Nut
Thread Starter
No custom burn, but i got it from www.performanceintl.com so i saved over $50 from www.jetchip.com.
The order ships straight from Jet Chip'* factory too lol....
The order ships straight from Jet Chip'* factory too lol....
#4
Senior Member
True Car Nut
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Oh yea, I checked out that site a few times before. Is this for your rebuild or your current engine? Let us know how it works. What does stage two require compared to stage 1?
#5
Senior Member
Certified Car Nut
Thread Starter
Its for both. I figure i might as well get used to how this affects it, so i know exactly what the other mods do. And this is a 10 minute job, that doesn't require other parts. My whole build is at once.
Stage 2 requires Intake, exhaust, and a 180. I have my intake, the high flow exhaust, and my engine has never been over 190/195, ever.
Stage 2 requires Intake, exhaust, and a 180. I have my intake, the high flow exhaust, and my engine has never been over 190/195, ever.
#7
Senior Member
Certified Car Nut
Thread Starter
Yes, will they have the following chips on their site..
Bonneville 87 96-03
Bonneville SSE 92 93 94
Bonneville SSEi 1993
So there may be an option for the 94 N/A guys if this is right?
Bonneville 87 96-03
Bonneville SSE 92 93 94
Bonneville SSEi 1993
So there may be an option for the 94 N/A guys if this is right?
#8
Junior Member
Posts like a Ricer Type-R
I figured you bought the SSE chip. I can't count the times people have asked me if the SSE chip will work on an SE (SLE). According to Jet, it won't work, but the only way to find out is to try.
I talked with Jet personally some time ago about this issue (after installing my own Stage 2, when everyone started asking about it). If you find that the SSE chip works, please contact Jet and let them know. They should update their site to reflect the SE/SLE compatibility. Considering the ratio of models built, this would be to their benefit.
I hope it works. My bet is that it will, but there might be some minor incompatibility issues with your PCM/model.
I talked with Jet personally some time ago about this issue (after installing my own Stage 2, when everyone started asking about it). If you find that the SSE chip works, please contact Jet and let them know. They should update their site to reflect the SE/SLE compatibility. Considering the ratio of models built, this would be to their benefit.
I hope it works. My bet is that it will, but there might be some minor incompatibility issues with your PCM/model.
#9
Senior Member
Certified Car Nut
Thread Starter
Yeah it'* the powertrain control module. The only thing on my powertrain that could be possibly different is the TC and perform shift stuff, but that wasn't even Std. ( i do have the buttons...)
I do have a 3.06 gear ratio.
I do have a 3.06 gear ratio.