Listen up
#11
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
The car'* pretty cool, decent condition in all, but a part of me wants him to blow it so he'll learn quicker. Otherwise he'll do it to his next car...even if it was another Sunflower
#12
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jul 2003
Location: 20 min fron Ottawa
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Hey.. you guys are all talking about people blowing their engines as they rev them to 6 grand.. but if you think about it.. say your cruisin around 160 -170(km'*) I havent checked but i think the car runs 4 to 4and a half thousand rpm'*.. is that just as bad? its not revved high but its a constant high rpm.. What do ya think?
#13
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I run 100mph at less than 3,000rpms...but whatever the rpms are I wouldn't go that speed for a long distance, or punch it up to 110 mph several times. It shouldn't be good for the engine if you do it on a routine basis, like my brother does.
#14
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I'll be supprised if you brother keeps that 3.1 together very long.... Most 3.1'* I now of by that year had a rev limiter.... You don't think that car may be chipped do you? Also is that a throttle body injected 3.1 or is that an MPFI 3.1.... If you get a chance look at the 8th didget of the Vin number... I'm interested in that vin code...
#15
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Don, my bro'* not here..so can't check now. I'm pretty sure though that the Engine code is "T" for MPFI 3.1 That'* the only available one for the 3.1 according to the 1990 F-bird service manual. But I will check when he gets here anyway.
#16
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jul 2003
Location: 20 min fron Ottawa
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
[quote="jr's3800"]In that case I'm rough on my 3800'*....... My usuall driving will see 2500 - 4500 rpms depending on which car I'm driving... But the series II is just fun on the road.... I love to put the hammer down merging onto the interstate.... Sometimes I will get to 5500-5900 rpms and then the 2nd to 3rd shift will come in to play... But yeah 100mph is right around 3000 rpms for me... I usually go 75-80 on long trips though... I've gotten 123,000 miles out of my 95, and its still running good... Engines been great, everything else seems to be wearing out...LOL
I agree.. Nothing better than putting th hammer down.. I find the series 2 loves to sit at around 90km/h then punch it.. it pulls to 140 150 easily... Playing around with 2L cars are even more fun... If you get ticked off.. just slow down to around 40-50 k.. then nail it... bye bye 2L lol.. Ever watch smokey and the bandit? VA VA VA VOOM!!!
I agree.. Nothing better than putting th hammer down.. I find the series 2 loves to sit at around 90km/h then punch it.. it pulls to 140 150 easily... Playing around with 2L cars are even more fun... If you get ticked off.. just slow down to around 40-50 k.. then nail it... bye bye 2L lol.. Ever watch smokey and the bandit? VA VA VA VOOM!!!
#17
Senior Member
Posts like a Turbo
Join Date: Jul 2003
Location: Boston Area
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
When you rev without a load, there is a lot of force trying to rip the rod cap off of the rod. Especially when you let up on the gas and the crank is pulling the pistons around. When under load, the force goes the other way, to the other side of the rod bearing. I read this somewhere a long time ago. It makes sense if you think about it. I can't think of any reason the valvetrain would care, however.
#19
Member
Posts like a V-Tak
Join Date: Jul 2003
Location: Worcester, MA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Well, think of it this way. When not in gear (no load), you are able to rev the engine up VERY quickly (this will happen in just about ANY car). Think about when you are in park.... When you first start the car right? Yeah, try spinning the engine up to redline before the oil has a chance to coat everything. Also figure this.... althought the valvetrain is ABLE to rev to 5900rpm, it does so slowly. It isnt designed to do this back and forth within a second... Either way, the rev limiter is only for park and neutral. In drive, you can rev all the way to redline. Try doing a burnout. It doesnt mind getting to redline at all. Trust me. Of course, the 2nd gear auto shift (regardless of what gear you have the stick in) makes it hard to hold it in a burnout unless you have the power to feather the throttle in the high end.
Also, I would like to see a video of anyone "Brake Boosting" up over 4Krpm. Stock stall converters will not allow you to do this, and you should break the brakes loose well before that. I have tried, many a time. Either way, its a great way to blow your tranny up...
Also, I would like to see a video of anyone "Brake Boosting" up over 4Krpm. Stock stall converters will not allow you to do this, and you should break the brakes loose well before that. I have tried, many a time. Either way, its a great way to blow your tranny up...
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Lounge
76
03-17-2004 12:26 AM