K&N
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
K&N
Anyone in BC with a Short Ram or CAI have a K&N cone? I'm curious because I've been looking for one for my 3" Short Ram intake...all I have is a cheap $20 ricer piece of crap from Autozone.
Here'* a pic of my engine to give you all an idea:
Here'* a pic of my engine to give you all an idea:
#5
Senior Member
Certified GM nut
not sure what you are wondering about K&N...???!!!
i'm running a 7" K&N cone (ru-3130)
if you are a looking for a 3" cone, i can't help you
i'm running a 7" K&N cone (ru-3130)
if you are a looking for a 3" cone, i can't help you
#6
Junior Member
Posts like a V-Tak
Join Date: Jul 2003
Location: Downriver, Mi
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
All you have to do is drop K&N an e-mail and tell them what dimensions you need, length, inside flange diameter and outside filter element diameter, and they will tell you what they have and how much it costs................good luck!![/code]
#7
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
I should have been more clear. I have a 3" diameter intake pipe and I want a K&N cone filter to fit right over it instead of my Autozone piece.
Sorry.
Sorry.
#8
Senior Member
Certified GM nut
#9
Junior Member
Posts like a Ricer Type-R
mach, I found the replacment. 3" pipe, by 6" at the fat end, 6.5" long, with the filter at the end also. K&N, Something 'extreme' or such. I'm ordering one. I'll let you know the part number.
#10
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zzzzzeke
check this out
http://www.jegs.com/cgi-bin/ncommerc...48&prmenbr=361
http://www.jegs.com/cgi-bin/ncommerc...48&prmenbr=361