K&N Cone Filter #RC-3250
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Mar 2004
Location: Waterloo, NY
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
K&N Cone Filter #RC-3250
I've got a K&N cone filter that I am not using at the moment and was wondering if it would work well with my '01 SSEi???
It is an RC-3250. It has a 3" outlet and is 6" long 4-5/8" at the end and 5-something at the base. How would this filter do with the */C 3800. Is it large enough?
Also, those of you that have extended warranties... Is there anything that I should know before I go moddin' my bonnie??? Please help me out!
TIA
It is an RC-3250. It has a 3" outlet and is 6" long 4-5/8" at the end and 5-something at the base. How would this filter do with the */C 3800. Is it large enough?
Also, those of you that have extended warranties... Is there anything that I should know before I go moddin' my bonnie??? Please help me out!
TIA
#2
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
you need a pipe to put that filter on. Cheapest option is to go to autozone and pick up the one for the honda, and get a rubber hose connector from a home improvement store. You will have to check your warranty to see if you can do it.
#3
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Mar 2004
Location: Waterloo, NY
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, the pipe is obvious. I am just wondering if I should sell this one and get a larger one. I'll pose the question on the warranty in the 2000+ section.
Thread
Thread Starter
Forum
Replies
Last Post
PaulPool
Performance, Brainstorming & Tuning
11
06-05-2009 12:37 AM