Intake
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jul 2003
Location: Ardmore, Oklahoma
Posts: 1,590
Likes: 0
Received 0 Likes
on
0 Posts
Intake
I noticed a lot of you are putting cool air intakes on your bonnies. I was wondering where can i get one for my 95, how much, and does it go on the car or do you have to fab it to make it fit.
#4
The big sites are:
www.intense-racing.com
www.3800performance.com
www.zzperformance.com
www.pfyc.com
www.thrashercharged.com
I don't know how well you can fit those CAI'* inside.
EDIT: These are fabricated for GP'*, but may work.
www.intense-racing.com
www.3800performance.com
www.zzperformance.com
www.pfyc.com
www.thrashercharged.com
I don't know how well you can fit those CAI'* inside.
EDIT: These are fabricated for GP'*, but may work.
#6
Junior Member
Posts like a Ricer Type-R
A GP intake is really too short for our cars, and their CAI setups won't fit ours. Your best bet is to fabricate from scratch or adapt, like many of us do. There are about 100 intake topics in this Performance forum. Many good ones just on the first two pages.
#8
Junior Member
Posts like a Ricer Type-R
BonneMeMn has fit a cheap civic intake into his car successfully.
Mine is one of a very few that were actually built specifically for the Bonneville. I built the heat shield myself, but chose the filter carefully. The filter actually supports the CAI and also holds the IAT. The heat shield alone cost me less than 10 bucks.
Mine is one of a very few that were actually built specifically for the Bonneville. I built the heat shield myself, but chose the filter carefully. The filter actually supports the CAI and also holds the IAT. The heat shield alone cost me less than 10 bucks.
#9
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jul 2003
Location: Ardmore, Oklahoma
Posts: 1,590
Likes: 0
Received 0 Likes
on
0 Posts
Well, i'm going to try something and see how it works out. If i get it on there and i think it will work and look right i will post some pics.
Thread
Thread Starter
Forum
Replies
Last Post
markviiisvt4
Performance, Brainstorming & Tuning
10
01-03-2006 11:46 AM