Input on whats next?
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: S.W. Florida
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Input on whats next?
I have a 93 SSEi. MAF screen removed, flowmaster 80, custom intake, 180 deg. therm., jet stage 1 chip, 2.2 pulley on SC with over sized idler pulley. Can someone give me a nudge in the right direction? This is a daily driver and will not see the track, but like anyone else I would like the car to feel SC'd.
#3
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Porting the EM'* is next on the Plate for you.....we are going to have a big development real soon for the Series One....gotta get the test cars figured out first
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: S.W. Florida
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the input. That can be done when the high flow cat is getting taken care of.
How will they compare to the already good stock ones?
How will they compare to the already good stock ones?
#6
Junior Member
Posts like a Ricer Type-R
There are two members currently working on improving the flow dynamics of the lower intake manifold. From testing on my car, the change is quite remarkable. My setup is a bit different, though. The car to watch for you would be SSEiMatt93. He'* modded almost like you with the exception that he just added a Jet Stage 2 PCM yesterday. I have one also, and love it.
Matt has a mildly ported LIM that he'* still trying to figure out (is it helping or hurting). Based partially on the LIM I ported six months ago.
Matt has a mildly ported LIM that he'* still trying to figure out (is it helping or hurting). Based partially on the LIM I ported six months ago.
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: S.W. Florida
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking of going to the Jet Stage 2 eventually, maybe I can move that up a little sooner. I dont want to purchase parts only to invalidate them with a later mod. If I get some mild cam and valve work done later will the J Stage 2 still perform satisfactorily?
One other question, as if there havent been enough already, can a water/alcohol injection kit work well for a daily driver?
One other question, as if there havent been enough already, can a water/alcohol injection kit work well for a daily driver?
#10
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: S.W. Florida
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the direction. I will have some time to tackle a few of these mods. If I have any more questions I know where to turn.