Headlight Washer bottle Brainstorming
#1
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Headlight Washer bottle Brainstorming
OK while the cars were parked next to each other in the garage, i got to thinking about the issues with installing intakes on the 92-94 SSE/SSEi'* with the HL washers....as i Looked over at a 97 washer bottle it struck me...instead of using the 92-96 washer, why not use the 97+???. the 97 has a design that is shorter and wraps aorund the Strut Tower
the 97+ will give you much more room and it mounts in stock locations
comments??
the 97+ will give you much more room and it mounts in stock locations
comments??
#4
DINOSAURUS BOOSTUS
Expert Gearhead
The 97-99 bottles will fit much better and have plenty of room for the compressor. Only downside I see is loosing the washer ability for headlights. However with a little ingenuity we could use one pump for both.
#6
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Bolingbrook, IL Location: Clarkston, MI
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
The 97-99 bottles will fit much better and have plenty of room for the compressor. Only downside I see is loosing the washer ability for headlights. However with a little ingenuity we could use one pump for both.
#8
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Bolingbrook, IL Location: Clarkston, MI
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
I think he is talking about non rice pipe users.
I know that it was a squeeze trying to get my CAI to fit well but I'm also prob. running the biggest CAI box, filter, and intake tube on a '92-'99.
I know that it was a squeeze trying to get my CAI to fit well but I'm also prob. running the biggest CAI box, filter, and intake tube on a '92-'99.
#9
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by llBlazin_llLo
I think he is talking about non rice pipe users.
#10
Junior Member
Posts like a Ricer Type-R
I could very well seal it entirely if I needed to in it'* current configuration.
Trim the end of your rice pipe at a slight angle at the TB, and you won't impact.
I trimmed my silicone reducer for the ADTR pipe to fit perfectly where I wanted it.
Trim the end of your rice pipe at a slight angle at the TB, and you won't impact.
I trimmed my silicone reducer for the ADTR pipe to fit perfectly where I wanted it.