headers ???????
08-25-2007, 11:14 PM
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2007
Location: hudson nh
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
headers ???????
ok so first thing is first i have a 1992 lumina z34 with a 2000 l67 swap. I am putting the new f40 6 speed into my swap. Seeing that my car is all apart i am doing an intercooler and i want to get a set of headers. now i was just wondering what headers are good and will they work with the 6 speed. i just want to know if the cross over pipe will fit over the tranny ????
08-25-2007, 11:25 PM
#2
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
TOGs or SLPs are the way to go in my opinion. I sure love my TOGs 
As for clearance with your setup it is hard to say, some measuring and talking with a vendor about that would probably be the best way to go.
Ed
As for clearance with your setup it is hard to say, some measuring and talking with a vendor about that would probably be the best way to go.Ed
08-26-2007, 12:56 AM
#5
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
You may have trouble in the tunnel area. I've seen this pop up with first gen W-body guys. IIRC DPP made a set similar to SLPs that The first gen guys are able to use.
08-26-2007, 08:53 PM
#7
Senior Member
Posts like a Supercharger
Join Date: May 2003
Location: Columbus, OH
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Pacesetter'* are the only ones that currently clear the firewall in swapped cars with out beeting the hell out of the firewall/tunnel.
Just an FYI-our team has 13 swapped cars
Just an FYI-our team has 13 swapped cars
Thread
Thread Starter
Forum
Replies
Last Post
99BonnevilleSE
Performance, Brainstorming & Tuning
30
12-03-2002 11:00 PM
streetracer
Performance, Brainstorming & Tuning
13
11-03-2002 05:34 PM