Fuel curve calibrator/Trans Cooler
05-07-2004, 09:33 AM
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Feb 2004
Location: Clarkston, Michigan
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Fuel curve calibrator/Trans Cooler
Fuel curve calibrator
Has anyone use one off these. How was the install. Make any difference. Have any pics of what it looks like and where it was mounted.
Trans Cooler
I have a B&M SUPERCOOLER and it has 5/16'* lines. Is this going to cause restriction gonig to 5/16'* from 3/8'*.Can i just buy a reducer fitting and put on there. has anyone else used the B&M cooler and does it work well. Does anyone have pics or tips on how to go about hooking this up.
Thanks
Ryan
Has anyone use one off these. How was the install. Make any difference. Have any pics of what it looks like and where it was mounted.
Trans Cooler
I have a B&M SUPERCOOLER and it has 5/16'* lines. Is this going to cause restriction gonig to 5/16'* from 3/8'*.Can i just buy a reducer fitting and put on there. has anyone else used the B&M cooler and does it work well. Does anyone have pics or tips on how to go about hooking this up.
Thanks
Ryan
05-07-2004, 11:50 PM
#2
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
I had to use a fitting to go from the old steel lines to the rubber hose anyway. I think mine are 3/8ths tho. IF you can, see if you can find a cooler that has 3/8 lines. If not, you will probably just have to get a special fitting from a parts/hardware store.
Thread
Thread Starter
Forum
Replies
Last Post
h1081dan
General GM Chat
20
11-07-2003 10:58 AM