YAY
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: Robertsdale Alabama
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
YAY
My Damplifier pro comes in tomorrow and I'll be installing it Sunday! No more intruding exhaust notes, and a little less road noise, woo hoo.
Also I sent the money order for my yella terra rockers and pushrods today. So hopefully with the 3 day shipping I opted for I can get them by next weekend.
So yeah I'll be updating this thread on both these projects as they progress.
Also I sent the money order for my yella terra rockers and pushrods today. So hopefully with the 3 day shipping I opted for I can get them by next weekend.
So yeah I'll be updating this thread on both these projects as they progress.
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: Robertsdale Alabama
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
yella terra 1.9s from intense with valve cover gaskets and medium load valve springs.
Damplifier pro: http://secondskinaudio.com/cgi-bin/index.cgi?pg=1&p=ps
Damplifier pro: http://secondskinaudio.com/cgi-bin/index.cgi?pg=1&p=ps
#6
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: Robertsdale Alabama
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
YAY again! Rockers/rods/springs come in tomorrow! They will be going in on sunday if I can find a valve spring compressor, hopefully that rope-in-the-plug hole trick will keep the valves from falling in the cylinders. So yeah yay!~
#8
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by McGrath
Any plans to get a Intense pcm to make the most of the extra ponies with some higher shift points?
Ed
Ed
ahhh very true McGrath the PCM would be nice to have for the advantages of the rockers....and Hugger I have a 98 PCM for you if you want one for a core, see my post in for sale
#9
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: Robertsdale Alabama
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Oh I just can't wait, parts are in, all I need to do now is get a valve-spring compressor (shouldn't be too hard since I work at a chrysler service shop), get some rope, and keep my pants on until sunday.
Sent a PM to 1993 SLE begging for that PCM (hopefully I'm not too late this time ) so once I have that I can look at getting an Intense PCM makeover sometime after the holidays.
I just hope these rockers and things make a more noticable difference than the pulley made. If everything goes to plan I should get around 30hp from the rockers and then 8hp from the 4kr that the rockers SHOULD get rid of.
Sent a PM to 1993 SLE begging for that PCM (hopefully I'm not too late this time ) so once I have that I can look at getting an Intense PCM makeover sometime after the holidays.
I just hope these rockers and things make a more noticable difference than the pulley made. If everything goes to plan I should get around 30hp from the rockers and then 8hp from the 4kr that the rockers SHOULD get rid of.
#10
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hugger10
I just hope these rockers and things make a more noticable difference than the pulley made. If everything goes to plan I should get around 30hp from the rockers and then 8hp from the 4kr that the rockers SHOULD get rid of.