03 COBRA PULLEY PULLER
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2006
Location: CHICAGO
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
03 COBRA PULLEY PULLER
Would a Pulley Puller made for an 03 Cobra work on a L67? They are both Eaton superchargers and I'm pretty sure I seen them have the same part number. I just bought one for like $80 from rpmoutlet.com which was way cheaper then all the other vendors I seen.
#2
Senior Member
Posts like a Northstar
Join Date: Jul 2006
Location: Meridian, ID
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
As long as it has the backing plate that goes behind the pulley and then the front plate bolts into it from the opposite side. You can not use a jaw type pulley puller with the series II */C. It will destroy your shaft.
Thread
Thread Starter
Forum
Replies
Last Post
Buickman104
Forced Induction
6
05-08-2006 06:56 PM
Chad V
Performance, Brainstorming & Tuning
4
07-26-2005 09:01 PM