Has anyone tried this?
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Jul 2007
Location: Memphis,TN Originally from MA
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone tried this?
I found this online and of course I am very interested in it. I would like oppinions from gearheads if this is a good setup or should I use the TB from ZZ performance instead?
http://www.getoverkilled.ca/tb-2.htm
http://www.getoverkilled.ca/tb-2.htm
#6
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
That TB would more than likely hurt flow. The L67 TB already has a large circular cross-section that leaves a little of the oval-organic-shaped L36 UIM entrance overhanging.
I modded a L67 TB a little while back:
http://www.bonnevilleclub.com/forum/...ic.php?t=50403
Agrazela Modded his TB and did some VE testing:
http://www.bonnevilleclub.com/forum/...ic.php?t=77710
http://www.bonnevilleclub.com/forum/...ic.php?t=79939
I modded a L67 TB a little while back:
http://www.bonnevilleclub.com/forum/...ic.php?t=50403
Agrazela Modded his TB and did some VE testing:
http://www.bonnevilleclub.com/forum/...ic.php?t=77710
http://www.bonnevilleclub.com/forum/...ic.php?t=79939
#7
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Jul 2007
Location: Memphis,TN Originally from MA
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Lots of good info.... I will say no to the L67 tb mod, looks to me that the ZZ TB would be more practical it is only 1mm smaller at 69mm. its still better than 65mm and I can focus on the real restrictions in the system...LIM
Thread
Thread Starter
Forum
Replies
Last Post
sircoarz
Audio (and aftermarket electronics)
4
09-19-2006 11:02 AM
ELMACHOGERACHO
Detailing & Appearance
2
06-01-2006 11:35 AM
sellncars
1992-1999
0
05-31-2004 03:19 AM