Dynomax Super Turbo muffler installed... (56k??)
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Dynomax Super Turbo muffler installed... (56k??)
After countless hours of bitching, pain, yelping, and kicking, it'* finally on. My first problem was the muffler was going on crooked, so i had to cut a small piece of pipe to put on the pipe and tapped it to make it straight, clamped it down. Then I slid the muffler on and proceeded to mount it, it actually managed to fit in the exhaust shield, clamped it down. Now comes the hard part, the bracket placement. I found mounting it to where the fiberglass bumper mounts to the bumper shocks was the best place. The only problem I have is that the exhaust outlets are SLIGHTY off center in the cutouts, which is no big deal, as I plan to put single outlet tips on anyways. Plus the ends of the exhaust pipes are enormously large, but oh well. It'* on, and I am happy. Pics will be posted tomorrow, and a sound clip will be posted when I get my */C back from Boosty.
Yes.... I used clamps, I am a cheapo, but I am gonna use this rust prevention paint I found that withstands 1200* heat.
Yes.... I used clamps, I am a cheapo, but I am gonna use this rust prevention paint I found that withstands 1200* heat.