RAISING THE HORSEPOWER OUTPUT?
#4
Senior Member
True Car Nut
Theres these these things called pullies you slap them on the supercharger and they make it spin faster. However before you do that:
full tuneup, plugs, wires, fuel filter, air filter/custom intake, etc.
It'* safe to drop to a 2.3 or so without KR if the car is running perfect.
full tuneup, plugs, wires, fuel filter, air filter/custom intake, etc.
It'* safe to drop to a 2.3 or so without KR if the car is running perfect.
#7
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Oct 2006
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thanks 4 the reply
Originally Posted by Peterg22000
there are lots of things you can do.
Take a look at my sig for a quick idea and do some searching, and ask some more specific questions to get better answers
Take a look at my sig for a quick idea and do some searching, and ask some more specific questions to get better answers
#8
Stock mufflers are plenty sufficient believe it or not, but a high flow cat. could help you out, and would be highly recommended before dropping pully sizes much. Series 1 exhaust manifolds are pretty good actually compared to the Series 2, and they wouldn't need upgrading yet.
#9
Nothing needs to be done to your exhaust. The stock piping is sufficient for a mild to moderately modded engine. Only thing needed to be done to your exhaust is check the Exhaust manifolds for cracks, and weld if needed, replace the cat with a high flow and a muffler isnt recommended since it will take alot to outflow it. Members here only have replaced their muffler for sound.
#10
Re: Thanks 4 the reply
Originally Posted by ColorMeBadd2
Also is that an actual picture of your "Bonne" and do you have others I might see??
http://www.bonnevilleclub.com/forum/...667&highlight=