air intake
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2011
Location: connecticut
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
air intake
im thinking about upgrading my air intake. right now its just the stock k/n (cause there'* a k/n sticker on the box and the square is red, and i've been using the sprays to revive every 2yrs) the only thing is, i dunno how to go about it without using household plumbing stuff. i mean my car looks ghetto rigged with the grills from the start, but on the other hand, i dont open my hood at shows anyways. decisions, decisions.
#2
Senior Member
Posts like a Turbo
Join Date: Jan 2010
Location: Murray, Ky
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
you could always make one like dan'*, it looks pretty good and wouldent be expensive. here'* a link
https://www.gmforum.com/performance-137/making-cold-air-box-280372/
https://www.gmforum.com/performance-137/making-cold-air-box-280372/
#9
DINOSAURUS BOOSTUS
Expert Gearhead
W bodies aren't quite that easy guys. A W body has no room to stuff a hose and be happy. The only way into the fender is small and requires a nearly 90 degree angle.
A wizair may be your easiest solution.
A wizair may be your easiest solution.
#10
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2011
Location: connecticut
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
ive seen guys put thin metal piping and insulate it. (x) degrees plus tap/die a hole for whatever that plug is thats on the intake hose...
i dunno im not going to focus on that now cause my trans is about to **** the bed after i spent $30 on fluids for that alone. plus i gotta worry about the paint. im so pissed right now i can roll a honda over.
i dunno im not going to focus on that now cause my trans is about to **** the bed after i spent $30 on fluids for that alone. plus i gotta worry about the paint. im so pissed right now i can roll a honda over.