Beefed up transmission options for the 4t60 HD?
#1
Senior Member
Posts like a Corvette
Thread Starter
Beefed up transmission options for the 4t60 HD?
Are there any performance options for this trans that can stand up to some abuse?
#2
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
The torque converters at zzp/intense will work.
LSDs and gear swaps of 3.33 and 3.73 are offered by
http://www.engineered.net/
A LSD for my car is 575.00 and if i add on a 3.33 gear conversion it'* another 150.00
It turns out that they won't sell the gear conversion unless you buy the LSD.
And i know that i've read somewhere that the 4t65 clutches fit the 4t60 with the exception of modifying one to fit, in which case you can get Raybestos clutches from here:
http://www.transmissioncenter.net/alto_2.htm
I found this site not too long ago and it'* the first site i've seen to offer a modified valve body.
http://www.importperformancetrans.com/gmautofwd.shtml
Other than that there is a trans line pressure adjuster that B&M puts out and it firms up shifts . I've read on other boards that it has no 1/4 mile gain though.
LSDs and gear swaps of 3.33 and 3.73 are offered by
http://www.engineered.net/
A LSD for my car is 575.00 and if i add on a 3.33 gear conversion it'* another 150.00
It turns out that they won't sell the gear conversion unless you buy the LSD.
And i know that i've read somewhere that the 4t65 clutches fit the 4t60 with the exception of modifying one to fit, in which case you can get Raybestos clutches from here:
http://www.transmissioncenter.net/alto_2.htm
I found this site not too long ago and it'* the first site i've seen to offer a modified valve body.
http://www.importperformancetrans.com/gmautofwd.shtml
Other than that there is a trans line pressure adjuster that B&M puts out and it firms up shifts . I've read on other boards that it has no 1/4 mile gain though.
#3
Senior Member
Posts like a Corvette
Thread Starter
Not to be a gerk or say your wrong or anything, but can anyone else verify that the parts are innerchangeable between the 2 transmissions?
#4
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Bolingbrook, IL Location: Clarkston, MI
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Some hard parts that ZZP sells for the 4t65 will fit the 4t60. I have seen 2 built ZZP 4t60 transmission in person.
Thread
Thread Starter
Forum
Replies
Last Post
Syn
General GM Chat
2
04-07-2010 10:29 AM