ignition wires?
09-20-2004, 05:48 PM
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jul 2004
Location: New York City
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
ignition wires?
I noticed that you guys use Taylor wires in your cars . Then I heard you had some issues with them . I need some new wires for my car so I was wondering what you guys suggest.
09-20-2004, 06:06 PM
#2
Senior Member
Posts like a Turbo
Join Date: Aug 2003
Location: Ashland, Ohio
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
MSD 8.5mm Super Conductor wires are awsome! I got the set that were premade for the gtp and they fit in nicely. These are definately my choice 
Got them from summit racing for $55
Got them from summit racing for $55
09-20-2004, 06:21 PM
#4
Junior Member
Join Date: May 2002
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I have had both Taylors and MSD on my car. They seem to be about the same. The Taylors we are thinking were just a bad batch (since everyone who got them got them around the same time).
09-20-2004, 07:33 PM
#5
Senior Member
True Car Nut
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Couple sets of wires you could get. Taylor 8mm, PRJ 10.4mm, or Belden 7mm (or larger I believe).
I personally suggest PRJ'* for insane overkill (YES, JOIN US). Some members have had trouble with Taylor wires, anyone have a conclusion on the findings?
Otherwise just stay clear of Bosch and you should be in the clear.
I personally suggest PRJ'* for insane overkill (YES, JOIN US). Some members have had trouble with Taylor wires, anyone have a conclusion on the findings?
Otherwise just stay clear of Bosch and you should be in the clear.
09-20-2004, 08:19 PM
#7
Senior Member
Certified GM nut
Join Date: Feb 2003
Location: Georgia
Posts: 2,095
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by opensourceguy
10 mm!! Holy crap, that'* like a friggen battery cable!
-justin
-justin
09-20-2004, 08:29 PM
#8
Senior Member
True Car Nut
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
Like a too large exhaust diameter. I wonder if that is true. However, I don't know, I doubt it though if your ignition system is is good condition. IE your system doc 
-justin
-justin
09-20-2004, 08:32 PM
#9
Senior Member
Certified GM nut
Join Date: Feb 2003
Location: Georgia
Posts: 2,095
Likes: 0
Received 0 Likes
on
0 Posts
haha well even with mine I'm thinking I'll be happy with the 8.5'* its got...might experiment and see but I can't see ginormous wires on a stock or even mildly upgraded ignition being 'better.' I really have no idea though but you'd think everyone would just grab the 10mm instead of 'bothering' with 8.5'*....anyone? Buler?
09-20-2004, 08:36 PM
#10
Junior Member
Posts like a Ricer Type-R
The diameter listed is pretty much exclusive to the insulation, or outer jacket. The core could be tiny or large. And a larger conductor in the middle will have LESS resistance, not more, but only when comparing apples to apples.
If for instance, the wires had identically-designed copper cores, a 1mm core would have more restance than a 2mm core, but if they were both listed as 8mm wires, the 2mm core would have less unsulation to protect against shorts. Make sense?
If for instance, the wires had identically-designed copper cores, a 1mm core would have more restance than a 2mm core, but if they were both listed as 8mm wires, the 2mm core would have less unsulation to protect against shorts. Make sense?
