Boost's Performance Attempt
#622
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
I post to try and help others each day. My performance build and other items are no less of learning experiences for all.
Ed..you'll need to enroll in AA if you keep drinking for all my issues.
Trans pan is back on, no fluid in the trans. Will be vacuuming the car out and wash it before the tow truck shows up tomorrow. We'll pull the trans dry, it dripped all night.
The fluid that looked good at 10pm in a parking lot and didn't look overly bad once home, became darker red and full of sparkles when in the drain pan.
Will know more tomorrow/Tuesday.
Ed..you'll need to enroll in AA if you keep drinking for all my issues.
Trans pan is back on, no fluid in the trans. Will be vacuuming the car out and wash it before the tow truck shows up tomorrow. We'll pull the trans dry, it dripped all night.
The fluid that looked good at 10pm in a parking lot and didn't look overly bad once home, became darker red and full of sparkles when in the drain pan.
Will know more tomorrow/Tuesday.
#623
Senior Member
True Car Nut
Sorry to hear about this, bud. I've been without a computer all weekend, and I did get your voicemail but haven't had suitable time to call you back. I hope this issue gets handled quickly and efficiently so you can get back on the road! Good job staying positive
#624
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Talked to Intense a little bit ago.
Trans will be shipped to then for diagnosis asap. I hope to pull it out tonight.not sure if that'* realistic though.
Trans will be shipped to then for diagnosis asap. I hope to pull it out tonight.not sure if that'* realistic though.
#625
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Yea, we will get a look at it.
Tim'* initial thought was stater support/converter but it is hard to tell from just pics.
If a lot of the shavings are not magnetic then it is most likely converter related (aluminum is not magnetic) although there is obvious metal stuck to the magnet so i'm sure it may have been a cascading effect.
Tim'* initial thought was stater support/converter but it is hard to tell from just pics.
If a lot of the shavings are not magnetic then it is most likely converter related (aluminum is not magnetic) although there is obvious metal stuck to the magnet so i'm sure it may have been a cascading effect.
#626
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Thanks again Todd and all fo the Intense folks for the quick response. I'll double check those shavings tonight. Being aluminum may be the reason why that large pile is off to the side and not on the magnet.
#627
Senior Member
Posts like a Camaro
Join Date: Dec 2003
Location: Massachusetts
Posts: 1,019
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rogue
Yea, we will get a look at it.
Tim'* initial thought was stater support/converter but it is hard to tell from just pics.
If a lot of the shavings are not magnetic then it is most likely converter related (aluminum is not magnetic) although there is obvious metal stuck to the magnet so i'm sure it may have been a cascading effect.
Tim'* initial thought was stater support/converter but it is hard to tell from just pics.
If a lot of the shavings are not magnetic then it is most likely converter related (aluminum is not magnetic) although there is obvious metal stuck to the magnet so i'm sure it may have been a cascading effect.
#628
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
At the moment the trans is penciled in for the 15th. This will mean the chances are extremely slim. The best I can figure is if everything falls into place which it won't..lol because Dan is going to drag feet on me a bit. I'll be lucky to have this shipped Wednesday. Depending on what is wrong....I assume best case scenario that it might be back Friday the 18th. If that'* the case..I'd push Dan to get access to the shop Friday night...work through the night if needed and reinstall.
Getting to the track Sat the 19th is "remotely possible" and quite doubltful in my calculations.
Getting to the track Sat the 19th is "remotely possible" and quite doubltful in my calculations.
#629
Senior Member
Posts like a Camaro
Join Date: Dec 2003
Location: Massachusetts
Posts: 1,019
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
At the moment the trans is penciled in for the 15th. This will mean the chances are extremely slim. The best I can figure is if everything falls into place which it won't..lol because Dan is going to drag feet on me a bit. I'll be lucky to have this shipped Wednesday. Depending on what is wrong....I assume best case scenario that it might be back Friday the 18th. If that'* the case..I'd push Dan to get access to the shop Friday night...work through the night if needed and reinstall.
Getting to the track Sat the 19th is "remotely possible" and quite doubltful in my calculations.
Getting to the track Sat the 19th is "remotely possible" and quite doubltful in my calculations.
#630
Guest
Posts: n/a
Originally Posted by CFoote
Originally Posted by BillBoost37
At the moment the trans is penciled in for the 15th. This will mean the chances are extremely slim. The best I can figure is if everything falls into place which it won't..lol because Dan is going to drag feet on me a bit. I'll be lucky to have this shipped Wednesday. Depending on what is wrong....I assume best case scenario that it might be back Friday the 18th. If that'* the case..I'd push Dan to get access to the shop Friday night...work through the night if needed and reinstall.
Getting to the track Sat the 19th is "remotely possible" and quite doubltful in my calculations.
Getting to the track Sat the 19th is "remotely possible" and quite doubltful in my calculations.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote