new rotors
#1
Senior Member
Posts like a Corvette
Thread Starter
new rotors
http://www.tirerack.com/brakes/brake...ar=&perfCode=*
I was curious if you would gain anything from the slots in the rotors even though they do not go to the edge. Just wondering
I was curious if you would gain anything from the slots in the rotors even though they do not go to the edge. Just wondering
#2
Senior Member
Posts like a Northstar
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
In my opinion, I wouldn't think that the means don't justify the cost. They are allot of money, I would save that for go fast mods personally........
#3
Junior Member
Posts like a Ricer Type-R
They advertise the grooves as wear indicators.
They wouldn't be very effective at venting pad gasses or water. And I believe I paid $74 each including shipping for my powerslots on Brembo blanks.
They wouldn't be very effective at venting pad gasses or water. And I believe I paid $74 each including shipping for my powerslots on Brembo blanks.
#4
Senior Member
Posts like a Corvette
Thread Starter
well it was sent to my email as a new product and i am getting ready to get better rotors and pads and possibly struts. There is a lot of twisties so I am looking to enjoy them and power is only good if you got good parts underneath
#5
Senior Member
Posts like a Northstar
Join Date: Oct 2004
Location: Purgatory
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
The ATE "atom" grove has a good reputation for venting pad gasses and shedding water.
They are the same as any other good sloted rotor as far as effectivness and performance is concerned.
The rotors Bill has will do the same job and you can invest the savings in better pads.
They are the same as any other good sloted rotor as far as effectivness and performance is concerned.
The rotors Bill has will do the same job and you can invest the savings in better pads.
Thread
Thread Starter
Forum
Replies
Last Post
jwakamud
Performance, Brainstorming & Tuning
7
09-18-2006 02:08 AM
Nytro67
Your Ride: GM Pictures & Videos
24
06-11-2003 10:42 AM
willwren
Performance, Brainstorming & Tuning
21
11-27-2002 11:08 AM