some of you have probably seen me mention Tranzgenic Performance, theyre the only place that make an intake for the 3.5 twin cam v6, i was browsing their site the other day and noticed this in the FAQ section.

I don’t see an intake system for my vehicle listed, can I get one made somehow?

Unfortunately, since we strive to make true “Cold Air” intake systems, it’* almost impossible to design one without the vehicle present. We WILL make a system for any vehicle if you can get us a test car to design it on. Generally the design car will get the prototype intake at cost. Please contact us if your interested in being a design vehicle!

maybe if there is a member nearby they might be interested in doing one for the Bonneville? i didnt know where else to put this and i just thought you guys might be interested, they are located in Colorado. the contact info is below.

Tranzgenic Performance Parts
925 Greenbrier Dr
Colorado Springs, CO 80916
719-499-7962 – Aaron
sales@tranzgenic.com

the dude is pretty slow at e-mailing, so id call if you were interested...just somethin to think about.

Well, the tough part are the various combinations within the 92-99 Gen. Double washer bottles and compressor location, not to mention slightly different headlights may interfere. In addition, the angle of the TB differs between NA and SC. 3 or 4 different variations could be possible. It'* a good idea, but tough to a make a 'one intake fits all' type thing.

I talked to that guy quite a while ago but I couldnt find any members near Colorado Springs to be the test car.

well im aware of that will...ive been around here long enough to know that, i just meant that maybe a member could get one available for a particular era of Bonneville...or maybe a couple of members could work together and get two generations or whatever you want to call them...and whatever member goes could be well educated in what would work with which one...*shrug* just thought