99 ssei dtc P1676?
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2003
Location: Racine Wi
Posts: 5,146
Likes: 0
Received 0 Likes
on
0 Posts
99 ssei dtc P1676?
hi i have a dtc that i cant figure out the cause of it
i clear it and it takes about 75 miles for it to return
i have a zzp pcm with evap delete and rear o2 delete
i tryed swapping the purge solenoid no luck
also this happened right after i put my magnaflow cat on
what i dont get is that a driver 4 line 6 is in regards to a evap code?
zzp was supposed to delete those?
i clear it and it takes about 75 miles for it to return
i have a zzp pcm with evap delete and rear o2 delete
i tryed swapping the purge solenoid no luck
also this happened right after i put my magnaflow cat on
what i dont get is that a driver 4 line 6 is in regards to a evap code?
zzp was supposed to delete those?
#3
DINOSAURUS BOOSTUS
Expert Gearhead
First off, please list the code description any time you list a trouble code. This ensures if you mistyped.. that the description is right.
Theft for fuel cutoff signal issue? That'* the code?
Theft for fuel cutoff signal issue? That'* the code?
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2003
Location: Racine Wi
Posts: 5,146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
First off, please list the code description any time you list a trouble code. This ensures if you mistyped.. that the description is right.
Theft for fuel cutoff signal issue? That'* the code?
Theft for fuel cutoff signal issue? That'* the code?
#6
Junior Member
Posts like a Ricer Type-R
Gamover, I don't know where you got that from, but we need the code DESCRIPTION. I've never heard anything like that before. Sounds like you have some funky scantool.
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Wow..how the heck did my tired eyes miss that.. (I actually looked BTW)
This is probably a flow when no flow is expected condition. Check all lines going to the evap soleniod behind the SC. Also check the connector.
I recently had one die after 170,000 good miles.. I replaced with a JY unit ... any 96+ will work.
This is probably a flow when no flow is expected condition. Check all lines going to the evap soleniod behind the SC. Also check the connector.
I recently had one die after 170,000 good miles.. I replaced with a JY unit ... any 96+ will work.
#10
DINOSAURUS BOOSTUS
Expert Gearhead
Ahhh correct a mundo (for once at least...lol)
Seems like they missed the boat on part of the PCM reprogram. You might want to check your receipt to ensure it was deleted.
Seems like they missed the boat on part of the PCM reprogram. You might want to check your receipt to ensure it was deleted.
Thread
Thread Starter
Forum
Replies
Last Post
93RedSled-SSE
1992-1999
45
04-21-2008 02:21 PM