Need some advice on some readings from my car.
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jul 2004
Location: New York City
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Need some advice on some readings from my car.
readings from my riviera with a 2.4 pulley FWI. Hi-flow cat. and 2 1992 parkavenue injectors replaced under duress (spelling) (inside joke)
Mat: 288 degrees
BLM: 137
Int: 128
Adv : 13 degrees
KR :2 degrees
this is at WOT.
Mat: 288 degrees
BLM: 137
Int: 128
Adv : 13 degrees
KR :2 degrees
this is at WOT.
#2
Junior Member
Posts like a Ricer Type-R
Looks pretty normal. On a hot day, you're going to have more KR. Be careful with that. 2.4 may have been a bit too aggressive without a better exhaust, particularly ported exhaust manifolds.
#4
Senior Member
Certified GM nut
Thread Starter
Join Date: Jul 2004
Location: New York City
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Looks pretty normal. On a hot day, you're going to have more KR. Be careful with that. 2.4 may have been a bit too aggressive without a better exhaust, particularly ported exhaust manifolds.
MAT of 288 degrees? ... really?
Is that good or bad?
#9
Senior Member
Certified GM nut
Thread Starter
Join Date: Jul 2004
Location: New York City
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
We don't have a MAT sensor. You do. I don't know what your normal readings should be. Do you have an FSM?
Hmm, I interepreted it as IAT, because my scantool says MAT instead, when I know I don't have an MAT to begin with.