92-99 Cupholder idea
#1
Senior Member
Certified Car Nut
Thread Starter
92-99 Cupholder idea
I'm gonna produce myself a cupholder thursday/friday when i'm in the cities.
One piece, plexi/acryllic sheet, It'll require no drilling, cutting or anything.
I hope to be able to hold a 32oz, without problem, under good manuevering. I'm not saying you can autox your slurpee, but who knows
Any other recommendations, ideas, or requests? I may produce these and sell them to those who are interested.
One piece, plexi/acryllic sheet, It'll require no drilling, cutting or anything.
I hope to be able to hold a 32oz, without problem, under good manuevering. I'm not saying you can autox your slurpee, but who knows
Any other recommendations, ideas, or requests? I may produce these and sell them to those who are interested.
#2
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
room for a 2liter? I'm a caffine junkie and I often have a 2liter of dew in my hand but when I'm driving I only have a can since I don't want to have a bottle in my lap, lol.
"Hi, my name is Ed I have a problem" (everyone) "hi Ed!"
"Hi, my name is Ed I have a problem" (everyone) "hi Ed!"
#3
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-99 Cupholder idea
Originally Posted by BonneMeMN
I'm gonna produce myself a cupholder thursday/friday when i'm in the cities.
One piece, plexi/acryllic sheet, It'll require no drilling, cutting or anything.
I hope to be able to hold a 32oz, without problem, under good manuevering. I'm not saying you can autox your slurpee, but who knows
Any other recommendations, ideas, or requests? I may produce these and sell them to those who are interested.
One piece, plexi/acryllic sheet, It'll require no drilling, cutting or anything.
I hope to be able to hold a 32oz, without problem, under good manuevering. I'm not saying you can autox your slurpee, but who knows
Any other recommendations, ideas, or requests? I may produce these and sell them to those who are interested.
#4
Junior Member
Posts like a Ricer Type-R
Mine will hold the biggest of cups, and they don't come out on sharp cornering maneuvers. And all I had to do was slightly modify a store-bought cheap part that matches my interior.
#6
Junior Member
Posts like a Ricer Type-R
slightly visible in this pic.....looking for more.....
The bigger they stretch to hold a big cup, the tighter they hold. I don't even look. It'* an instintive reach to use them. They've been on there 2 years with big gulps, and never came loose, and never dropped a drink. I have them in my Honda now, too.
#8
Junior Member
Posts like a Ricer Type-R
I pulled the rubber strap out that normally hooks in the window channel, then cleaned both surfaces and used 3M Body and Trim tape to hold them on. For the Honda, I trimmed the top edge so that slot is gone. The weight of the cup actually rests on the 'hump'. It'* also naturally positioned so if it DOES come loose, it hits your leg and goes nowhere. But it'* not so close that your leg rests on it.
#10
Junior Member
Posts like a Ricer Type-R
Used to run my water injection. Current version of water/methanol injection doesn't use them. So the switches are now Gtech, front radar, rear radar. LED'* on when switch is on. Beats fiddling with little switches on components, or tryhing to reach the rear radar.