[i]Cold air[/i] intake in Canada...sounds simple eh?
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: Everett, Ontario, Canada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
[i]Cold air[/i] intake in Canada...sounds simple eh?
i was looking at putting a cold air intake on my 96 SE Series II 3800 BUT after popping the hood i saw this cover that held what looks like my computer in the way!!?? i want to do the rice pipe option from the civic with a K&N X tream (like many others on this site have) because it gives the extra reach away from the motor providing colder air but it looks like this computer is in the way?? any ideas as to where to put this thing to get my CAI in? And is the rice pipe the best idea, eBay has some for our cars for like $60 US (shipped to my house) that look really good with a K&N filter included? just wondering...
#2
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
#3
Junior Member
Posts like a Ricer Type-R
http://www.bonnevilleclub.com/forum/...e=article&k=58
www.intense-racing.com sells a PCM tray to relocate it.
www.intense-racing.com sells a PCM tray to relocate it.
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: Everett, Ontario, Canada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
thanks willwren,
I think that'll work for me
I've read through that rice pipe option thread and it doesn't really help me, i'm looking more for WHERE to relocate my CPU in my car cause its just in the way....any ideas?
Thanks again
ps. your custom heat shield is awesome! i think thats the way i'm going to go, the clear looks so nice
I think that'll work for me
I've read through that rice pipe option thread and it doesn't really help me, i'm looking more for WHERE to relocate my CPU in my car cause its just in the way....any ideas?
Thanks again
ps. your custom heat shield is awesome! i think thats the way i'm going to go, the clear looks so nice
#6
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: Everett, Ontario, Canada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
yeah i read through your stuff, good work!
This mod would be much easier if my CPU was in my glove box lol
i may just leave the computer there and cut the tube shorter, will that work??
This mod would be much easier if my CPU was in my glove box lol
i may just leave the computer there and cut the tube shorter, will that work??
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2005
Location: Everett, Ontario, Canada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
i should be able to make a custom tray right?? just use thin sheet metal to make a hanging one below my glove box, only problem is getting it over there...there is a ton of wiring coming out...i'd have to extend all of them right? or disconnect them and weave them back through the engine bay?? seems like a lot of work for an after school job eh??
#10
Senior Member
Posts like a Turbo
Join Date: Jan 2005
Location: Melbourne, FL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
The PCM tray that Intense sells won't work for the '96 Bonnevilles so you'll have to come up with your own solution. Our PCM'* are just a little larger than the 98?+. If you sit the PCM on its side though, you should be able to fit an intake in there without any problems.