4" dryer duck and intake
#3
Senior Member
True Car Nut
You may want to drill a new hole to relocate the Hood sensor.. and you can run it straight down to just above the fog light on SE'* ( there'* a nice opening there) on SSEIs with fog lights near the center. if you look underneath it.. there'* 3 opening ( divided by the bottom fins for the foglights ) and have it ducted to one of the opening on the side closest to the driver side.
#4
Junior Member
Posts like a Ricer Type-R
Join Date: Jan 2003
Location: Elmhurst
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
air duct
I made a custom intake for my car with air duct, i removed the foglamps and used the holes there to bolt the air duct to, then ran both pipes to the boxand had them connect just over the drivers side bumper mount. and remove the snorkle. thats it, the power gain was noticable, if you are running a sc then it is kinda usless, since the sc omly takes so much air at a time, but it still gives it colder air.
#7
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I'd like to see pics of that too since I've been constantly thinking of how to do it. I also want it to look good and not ghetto, even though my Bonne is technically ghetto green & gold.
#9
Senior Member
True Car Nut
Originally Posted by russianpolarbear
You want to enlighten me what the hell a hood sensor is?