Shortened Dogbones
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2005
Location: Red Deer, Alberta WCBF_'05_Survivor WCBF_'06_Survivor WCBF_'07_Survivor
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Shortened Dogbones
I was thinking about pick up some shortened dogbones and I was wondering if they would reduce engine flex?
#2
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
They are mainly for lowered cars. It just pulls the rear tail shaft of the trans up a bit to put the axles closer to the angle they were stock.
If you want less engine flex, try some poly inserts for your dogbones.
If you want less engine flex, try some poly inserts for your dogbones.
#3
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2005
Location: Red Deer, Alberta WCBF_'05_Survivor WCBF_'06_Survivor WCBF_'07_Survivor
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Alright, that makes sense. Could you point me in the right direction for new poly mounts? :P
#4
Junior Member
Posts like a Ricer Type-R
#5
DINOSAURUS BOOSTUS
Expert Gearhead
http://www.intense-racing.com/
Look in 3800 under suspension. I've seen them and heard from others that they are a large improvement over stock.
Look in 3800 under suspension. I've seen them and heard from others that they are a large improvement over stock.
#7
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by BillBoost37
http://www.intense-racing.com/
Look in 3800 under suspension. I've seen them and heard from others that they are a large improvement over stock.
Look in 3800 under suspension. I've seen them and heard from others that they are a large improvement over stock.
Here are a few comparison pics between INTENSE and other vendor'* mounts.
#8
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2005
Location: Red Deer, Alberta WCBF_'05_Survivor WCBF_'06_Survivor WCBF_'07_Survivor
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the quick reply. The Intense one'* look like the way I will go.
#10
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Intense all the way!
Like you need to reduce engine flex in your Wbody..pish...
Like you need to reduce engine flex in your Wbody..pish...