91 Olds 88, Code 34 and 41 help
#1
91 Olds 88, Code 34 and 41 help
Hello, I have a 1991 Oldsmobile 88 Royal with the check engine lights on. I've been trying to get these two codes off for the longest.. Code 34 is the MAF sensor right ? I have replace about 3-5 off these from the junkyard and cleaned them with MAF sensor cleaner on my car and it'* still not fixing the code.. Its getting power from the wire ( 11.8V). I'm really lost on that one.. The other code is code 41 (Cam Sensor Circuit). I replace the Camshaft position sensor and that didn't work either.. I'm trying get the car to TDC for me to see if the cam Magnet (interrupter) is broken. How do I rotate the engine for me too see it? I took all the spark plugs out and removed the Water pump pulley..
This guide is great.. but I just don't really know how rotate the engine. Code 41: lost cam magnet in 3800
This guide is great.. but I just don't really know how rotate the engine. Code 41: lost cam magnet in 3800
#2
Senior Member
True Car Nut
34 map sensor signal out of range, low (MAF sensor in a car with a MAF sensor and is for MAP sensor in a car with a MAP sensor.)
the pcm sees it as low so it could mean the wire is shorted to ground somewhere. look in the plug, the plug at the pcm, and anywhere alone the loom it goes near metal
as far as rotating the engine just get a socket to fit the big one on the pulley and a big wrench or breaker bar and turn it
the pcm sees it as low so it could mean the wire is shorted to ground somewhere. look in the plug, the plug at the pcm, and anywhere alone the loom it goes near metal
as far as rotating the engine just get a socket to fit the big one on the pulley and a big wrench or breaker bar and turn it
#3
34 map sensor signal out of range, low (MAF sensor in a car with a MAF sensor and is for MAP sensor in a car with a MAP sensor.)
the pcm sees it as low so it could mean the wire is shorted to ground somewhere. look in the plug, the plug at the pcm, and anywhere alone the loom it goes near metal
as far as rotating the engine just get a socket to fit the big one on the pulley and a big wrench or breaker bar and turn it
the pcm sees it as low so it could mean the wire is shorted to ground somewhere. look in the plug, the plug at the pcm, and anywhere alone the loom it goes near metal
as far as rotating the engine just get a socket to fit the big one on the pulley and a big wrench or breaker bar and turn it
Last edited by Sin-city-big-boy; 05-09-2014 at 08:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
lobi
Oldsmobile
16
02-24-2011 10:46 AM
KneeHowMa
1992-1999
13
12-18-2006 05:31 PM