1992 cutlass ciera master cylinder
#1
1992 cutlass ciera master cylinder
Greetings, can anyone tell me the brake line nut sizes(diameter x thread count) of the four output lines of the master cylinder. The diameters and thread sizes all appear to be different. Car uses 3/16" od lines.
I would also like to know the destination of each line. If anyone could give me this data I would appreciate it. View would be facing master cyl from drivers side fender. (ex) top left is___, top right is___, bottom left is___, bottom right is___.
I would also like to know the destination of each line. If anyone could give me this data I would appreciate it. View would be facing master cyl from drivers side fender. (ex) top left is___, top right is___, bottom left is___, bottom right is___.
#3
Retired
I'm afraid Justin'* right. I have the same issue with all three of my vehicles. No one seems to know the thread size.
A word of advice though. If your going in to replace 1 line, more than likely, your going to end up replacing more than 1 because sometimes you accidentally bump another one. So, get a big spool like 25ft of brake line, a double flare kit and some fittings and go to town on her.
A word of advice though. If your going in to replace 1 line, more than likely, your going to end up replacing more than 1 because sometimes you accidentally bump another one. So, get a big spool like 25ft of brake line, a double flare kit and some fittings and go to town on her.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Thread
Thread Starter
Forum
Replies
Last Post
killer_cr80r
Lounge
7
04-14-2004 12:32 AM
killer_cr80r
Oldsmobile
7
04-02-2004 08:49 PM
killer_cr80r
Lounge
6
04-02-2004 08:19 PM