P1860
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
P1860
P1860
Description
Torque converter clutch pulse width modulation solenoid
Code type, Electrical
Symptoms
Trans may slip as it holds in 3rd gear
Disable shift adapts
Inhibits TCC
Inhibits 4th gear in hot mode
Causes
Description
Torque converter clutch pulse width modulation solenoid
Code type, Electrical
Symptoms
Trans may slip as it holds in 3rd gear
Disable shift adapts
Inhibits TCC
Inhibits 4th gear in hot mode
Causes
- Failure of pressure control solenoid
- Failure of TCC/PWM solenoid
- Short in wire harness
- Loss of 12v on pin E
- Check for 12v on pin E
- Check for Ohms on pins C-D, 3-5ohms at 68*f If out of range, replace EPC
- Check for Ohms on pins T-E, 10-12ohms at 68*f, if out of range replace TCC/PWM solenoid
- Check for short on wire harness
Thread
Thread Starter
Forum
Replies
Last Post