EVAP VENT SOLENOID CONTROL CIRCUIT
The Output Driver Module (ODM) is used by the PCM to turn on
many of the current-driven devices that are needed to control various
engine and transaxle functions. Each ODM is capable of controlling up
to 7 separate outputs by applying ground to the device which the PCM
is commanding on. ODM have the capability of diagnosing each output
You likely won't notice any drivability problems.
- Improper voltage level detected on output circuit controlling
EVAP canister vent valve.
- Check for shorts or bad connections on EVAP
- Replace EVAP canister vent valve.