P1351
09-26-2009, 01:48 PM
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
P1351
P1351
Description
IGNITION CONTROL (IC) CIRCUIT OPEN
Ignition Control Module (ICM) sends signals that PCM requires
for fuel control and spark advance calculations. At start of engine
crank, ICM controls spark advance (by-pass mode). When second 3X
signal is recognized by PCM, it applies 5 volts to by-pass circuit,
commanding ICM to switch Ignition Control (IC) of spark advance to PCM
(IC mode). An open in IC circuit, or a short to voltage in by-pass
circuit will set DTC 1351.
Symptoms
You likely won't notice any drivability problems.
Causes
Description
IGNITION CONTROL (IC) CIRCUIT OPEN
Ignition Control Module (ICM) sends signals that PCM requires
for fuel control and spark advance calculations. At start of engine
crank, ICM controls spark advance (by-pass mode). When second 3X
signal is recognized by PCM, it applies 5 volts to by-pass circuit,
commanding ICM to switch Ignition Control (IC) of spark advance to PCM
(IC mode). An open in IC circuit, or a short to voltage in by-pass
circuit will set DTC 1351.
Symptoms
You likely won't notice any drivability problems.
Causes
- PCM detects open circuit in by-pass circuit.
