MAF sensor replacement
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
MAF sensor replacement
The only tool you will need is a T20H driver.
These are the ones with a hole in the center
Remove the connection plug from the MAF. It'* located on the throttle body.
Now using your T20H driver, remove the two screws holding the MAF in place.
Now carefully remove the MAF sensor, a slight twist may be needed.
Now put the new MAF in the throttle body and put the screws back.
Plug the new MAF in.
Your all done.
These are the ones with a hole in the center
Remove the connection plug from the MAF. It'* located on the throttle body.
Now using your T20H driver, remove the two screws holding the MAF in place.
Now carefully remove the MAF sensor, a slight twist may be needed.
Now put the new MAF in the throttle body and put the screws back.
Plug the new MAF in.
Your all done.
Thread
Thread Starter
Forum
Replies
Last Post