Water pump pulley change
12-06-2009, 02:27 PM
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Water pump pulley change
Locate your water pump pulley.
You will need a 8mm wrench, loosen the 4 bolts holding the pulley on, just break them loose.
Once the bolts are broke loose, remove the acc belt buy using a 15mm socket and turning the tensioner counterclockwise.
Now remove the 4 bolts.
The pulley will come off easy by hand.
This is what the pulley mounts to.
And here is the pulley.
To put the new pulley on simple reverse the procedure.
You will need a 8mm wrench, loosen the 4 bolts holding the pulley on, just break them loose.
Once the bolts are broke loose, remove the acc belt buy using a 15mm socket and turning the tensioner counterclockwise.
Now remove the 4 bolts.
The pulley will come off easy by hand.
This is what the pulley mounts to.
And here is the pulley.
To put the new pulley on simple reverse the procedure.
Thread
Thread Starter
Forum
Replies
Last Post
cjpenny89
1992-1999
3
09-13-2006 11:15 AM
