Oil pan removal 96-99
10-27-2009, 10:19 AM
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Oil pan removal 96-99
Jack up your car and put on jack stands.
Drain the oil from the pan.
Remove the oil level sensor on the front of the oil pan. Failure to do this will result in a damaged sensor.
Remove the oil pan bolts.
Remove the oil pan.
Remove the oil pan gasket.
Clean up the gasket surface.
Clean out oil pan.
Reverse procedure to install.
Torque oil pan bolts to the correct amount.
Drain the oil from the pan.
Remove the oil level sensor on the front of the oil pan. Failure to do this will result in a damaged sensor.
Remove the oil pan bolts.
Remove the oil pan.
Remove the oil pan gasket.
Clean up the gasket surface.
Clean out oil pan.
Reverse procedure to install.
Torque oil pan bolts to the correct amount.
Thread
Thread Starter
Forum
Replies
Last Post