Heres how bad my Alignment was off...
03-15-2007, 09:04 PM
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Heres how bad my Alignment was off...
So i got the alignment right after i did the FE2 Swap.
Look how bad it was ROFL
Look how bad it was ROFL
03-15-2007, 09:16 PM
#3
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
You should have seen the numbers that were poppin up after I dropped mine. All of the cambers were in the negative 1-3 range and the front toe was really whacked.
03-16-2007, 09:38 AM
#5
Guest
Posts: n/a
Originally Posted by bandit
i dont know why they dont check the Caster :? You can adjust it just a bit.
It could be adjusted if it was really bad but would require drilling out the hole on the strut tower to allow for adjustment...
More than most of the time all we have to worry about is Toe and Camber
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
03-16-2007, 12:48 PM
#6
Senior Member
True Car Nut
wow, at least they were able to bring them into spec. moms taurus rear camber was too far in, and they couldnt adjust it. had to put a camber kit on it so that it would level out. i need to get an alignment on the tempo bad. the camber is whacked and it has a pull to the left
03-16-2007, 01:00 PM
#7
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Now mind you this was all because i replaced the Struts front and rear and the springs. so that through everything Way off
I could have got the Camber closer but after fighting the Front Sway bar and the Strut bolts i just want to put her back together and get it Done!
I could have got the Camber closer but after fighting the Front Sway bar and the Strut bolts i just want to put her back together and get it Done!
03-16-2007, 01:09 PM
#8
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I remember Bill telling me that you fought your steering wheel while driving.
I had all four struts and tie rod ends done a few weeks ago. I couldn't get an alignment that day, but it drove as straight as it did before, and still does. Dan did a good job of putting everything back as close to where it was prior.
I should still get an alignment done though.
I had all four struts and tie rod ends done a few weeks ago. I couldn't get an alignment that day, but it drove as straight as it did before, and still does.
Dan did a good job of putting everything back as close to where it was prior. I should still get an alignment done though.
03-16-2007, 01:52 PM
#9
Guest
Posts: n/a
Yes Pete, get that alignment done... When I disassemble I like to mark everything to try and get the alignment close.. But the key is a good shop 
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post
BonnieBrougham
Lounge
3
12-16-2004 05:38 PM
Nytro67
Your Ride: GM Pictures & Videos
24
06-11-2003 10:42 AM