s/c polishing and engine rebuild
02-24-2010, 05:44 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2009
Location: nova scotia
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
*/c polishing and engine rebuild
...dose the supercharger has to be tooken off to pilish it / should it be taken off and how much dose it take to rebuild and bore out a 3.8 supercharged(canadian price?)
02-24-2010, 05:51 PM
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Yes, remove it to polish and port it. It'* really messy, and you don't want that in your engine. If you have the tools, it'* mainly your time and sanding drums. If you don't have the tools, I don't suggest trying it. If you just want to clean up the outside, that can be left on the engine. Just disconnect the battery because you will be working near the alt.
Thread
Thread Starter
Forum
Replies
Last Post
slgarner3
2000-2005
5
10-15-2009 07:25 AM
Peterg22000
Forced Induction
29
03-13-2007 12:38 AM
willwren
Performance, Brainstorming & Tuning
42
06-20-2005 09:24 AM