The Rice Files and Other Finds
#91
Senior Member
True Car Nut
This is the lounge so we can hijack haha..i love the gearing in my dads ram i think he said he has 3.80 somethings..i have 3.42'* fidure with the 33'* im to around 3.05'* still quick dnt think its much slower but idk\my stock ole 247k mile 4l60e still nice and tight never touched except for fluid and filter swaps...
#94
Senior Member
True Car Nut
yeah we should..im puttin the 265'* back on first lol..idk buddy your truck runs like what 260ih horse??
mmine was 225 stock and is now around the 3 and a half mark at the ground and yours is heavier...who knows only one way to find out hehe
weird i just ran the vins and bubba is gvwr 6200 and claudia is 6100 no way they cant be that close a 2wd with a v6 only 100 pounds less than a 4wd v8 i dnt beleive it lol
mmine was 225 stock and is now around the 3 and a half mark at the ground and yours is heavier...who knows only one way to find out hehe
weird i just ran the vins and bubba is gvwr 6200 and claudia is 6100 no way they cant be that close a 2wd with a v6 only 100 pounds less than a 4wd v8 i dnt beleive it lol
#95
Senior Member
Certified GM nut
Join Date: Dec 2005
Location: dekalb illinois
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
im running 265'* and they still arent big enough
i should be right around 225 horse and about 310 torque..yeah my truck is 7K pounds so im pretty sure it would be quite intresting..however on dry pavement i can hook all day long!
wet pavement i cant keep it together to save my life!
#96
Senior Member
True Car Nut
lol my stock are 265/75..dry pavement from a dead stop to pedal slammed equals lots of burnt rubber n smoke lol.wet pavement i dnt have a chance lol...i'm going to put in a diff gear set and an lsd or locker eventually instead of this 1 tire fire bs.and i know im around 350 ish maybe more on a good day..but i have internal mods .60 over .460 cam and other stuff
#97
Senior Member
Certified GM nut
Join Date: Dec 2005
Location: dekalb illinois
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
see stock im supposed to have 225/75'*
im running 265/75'*
between the 3.55 LSD'* and the snap the small block 318 has plus with all the new parts in the powertrain, my truck gets up and goes..and beat a 86 chevy reg cab long bed 350 2wd without even breaking a sweat
so im curious lol
im running 265/75'*
between the 3.55 LSD'* and the snap the small block 318 has plus with all the new parts in the powertrain, my truck gets up and goes..and beat a 86 chevy reg cab long bed 350 2wd without even breaking a sweat
so im curious lol
#98
Senior Member
True Car Nut
lol me to ive been challenged by multiple assortments of vehicles in my old man 96 318 2wd ram and havent lost once...my stockers are thee 265'* but im runnin 33x12.5s now hehe claudia has 235/75'* and the 4.3 kind of impressive with 165 horsepower at 4,000 rpm and a torque of 235 pound-feet at 2,000 rpm. It has a maximum payload of 1,736 pounds, and a towing capacity of 5,000 pounds Where as bubba (stock)
210 horsepower at 4,000 rpm and 300 pound-feet of torque at 2,800 rpm. The bore and stroke of the engine are 4.0 inches and 3.48 inches, respectively, and its compression ratio is 9.3:1. 6500 tow capacity and 2563 payload not bad for old girls lol
210 horsepower at 4,000 rpm and 300 pound-feet of torque at 2,800 rpm. The bore and stroke of the engine are 4.0 inches and 3.48 inches, respectively, and its compression ratio is 9.3:1. 6500 tow capacity and 2563 payload not bad for old girls lol
#99
Senior Member
True Car Nut
Haha saw this today parked at a pizza hut right as wife and i were gettin in the truck leaving taco bell up close you could tell it was just spray painted....lmao