my new pc sucks
#31
Senior Member
Posts like a Camaro
Join Date: Nov 2002
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bandit
So if everyone that can help find the latest BIOS drive for GA-7N400 Pro2 (Rev.1) it will help out alot.
#32
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
DSC03950.jpg
here is running the 133 setting... it doesnt stay running in 166 or 200 setting
processor2.jpg
here is running the 133 setting... it doesnt stay running in 166 or 200 setting
processor2.jpg
#33
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Could you Juice up the voltage if you bump the FSB to 166.....
Doesn't sound like the CPU'* getting the power it should get.
Doesn't sound like the CPU'* getting the power it should get.
#35
Senior Member
Posts like a Camaro
Join Date: Nov 2002
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BonneMeMN
I'm not saying he needs to boot up to get into BIOS.
Your ram may not be good enough to run @ 200 mhz, what did you get? What are your memory settings?
Your ram may not be good enough to run @ 200 mhz, what did you get? What are your memory settings?
EDIT: looking at the BIOS screen shot, the SPD is reporting 400, so no problem there.
#39
Senior Member
Posts like a Camaro
Join Date: Nov 2002
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
what does SPD 400 mean?
when i bumped it to 166 or 200 the computer doesnt stay booted
when i bumped it to 166 or 200 the computer doesnt stay booted
Since your memory is running at 400 Mhz DDR, that would indicate that it should be able to support a 200Mhz front side bus. WJ'' or Bandit, correct me if I am wrong
#40
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
the way that me and bandit were understanding it was that the 400 number should be double of what the FSB setting is it... 133 being 266.... so if the 400 is just stating the RAM, then any ideas why it wont stay booted at 200?