Minor body work on a Vette
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Minor body work on a Vette
This guy dropped a weed wacker on his car over the winter and took out a nice chip.
DSC00195.jpg
I cleaned it up a give it a little primer.
DSC00196.jpg
Lots of filling.
DSC00423.jpg
Getting it closer with a little glazing compound
DSC00425.jpg
Sanded and now masked off.
DSC00426.jpg
Get to use the new spray gun.
DSC00427.jpg
Spraying the area.
DSC00429.jpg
Removed the masking.
DSC00430.jpg
Lots of wet sanding, some rubbing compound, and polish. then a little wax.
DSC00431.jpg
Still needs a bit more work. Has a little over spray but ran out of time. The color was not a perfect match.
DSC00195.jpg
I cleaned it up a give it a little primer.
DSC00196.jpg
Lots of filling.
DSC00423.jpg
Getting it closer with a little glazing compound
DSC00425.jpg
Sanded and now masked off.
DSC00426.jpg
Get to use the new spray gun.
DSC00427.jpg
Spraying the area.
DSC00429.jpg
Removed the masking.
DSC00430.jpg
Lots of wet sanding, some rubbing compound, and polish. then a little wax.
DSC00431.jpg
Still needs a bit more work. Has a little over spray but ran out of time. The color was not a perfect match.