r/c help
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Grand Rapids, Mi
Posts: 3,244
Likes: 0
Received 0 Likes
on
0 Posts
r/c help
well i get my new evader tonight i get it all together and i start driving well the first battery was fine a bit slow but fine well the second battery was fine untill i was driving up and down my street when i start coming back and im going then it just slows down, so i walk twards it and i give it gas all i hear it the motor spinning. well i since the gear cover is clear i look in and i see that the motor shaft is spining but the gear arent. why? please help i tryed calling tower hobbies but their closed.
#3
is the little gear on the motor spinning? if it isnt, all that needs to be tighten'd is the allen bolt on the small gear.
if its in the clutch, then ill work you through that...
if its in the clutch, then ill work you through that...
#4
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Grand Rapids, Mi
Posts: 3,244
Likes: 0
Received 0 Likes
on
0 Posts
i found the problem its the gears screw that holds it on well i cant fin dit so ill have to goto the hobby shop tomrrow morning.
#5
aight cool
i have had my evader for like 2 years now, and i have replaced about 1/2 of the parts on it, and need to replace the other half
tip 1 - dont let your friends drive it, no matter how good they
tip 2 - dont drive in the cold, plastic loves to shatter
i shattered mine off a ft jump the day i got it, xmas eve!!! i was so sad.
but duratrax was really good about it, they shipped me the parts and dindt even ask for the old ones.
so hey, you should call in and see if you can get me some new parts free from your 1 yr warrenty.... :P
i have had my evader for like 2 years now, and i have replaced about 1/2 of the parts on it, and need to replace the other half
tip 1 - dont let your friends drive it, no matter how good they
tip 2 - dont drive in the cold, plastic loves to shatter
i shattered mine off a ft jump the day i got it, xmas eve!!! i was so sad.
but duratrax was really good about it, they shipped me the parts and dindt even ask for the old ones.
so hey, you should call in and see if you can get me some new parts free from your 1 yr warrenty.... :P
#7
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Grand Rapids, Mi
Posts: 3,244
Likes: 0
Received 0 Likes
on
0 Posts
i found it do u have any tips or things to watch for on my evader? or even tuning tips? on the box it was 21.4 mph how stock? i dont think so it doesnt look 21.4 mph
#9
here she is: http://cgi.ebay.com/ws/eBayISAPI.dll...904379035&rd=1
mine feels like it cruises, however its not the fastest one i have had, my last one was a 4wd racer and it did 30+ no prob....until i hit my car tire with it and it exploded
i run 9.6v batteries, not the stock 7.2, i have been running it for 2 years with no problems. make sure the tires are aligned perfectly otherwise they will wear really quickly. other than keeping it clean and greased, have fun!
mine feels like it cruises, however its not the fastest one i have had, my last one was a 4wd racer and it did 30+ no prob....until i hit my car tire with it and it exploded
i run 9.6v batteries, not the stock 7.2, i have been running it for 2 years with no problems. make sure the tires are aligned perfectly otherwise they will wear really quickly. other than keeping it clean and greased, have fun!
#10
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Grand Rapids, Mi
Posts: 3,244
Likes: 0
Received 0 Likes
on
0 Posts
i was gonna ask why i couldnt use a 9.6v battery but u answered it before i could ask.
wouldnt the motor get hot or could it hurt the esc?
wouldnt the motor get hot or could it hurt the esc?