My xbox just RROD
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
My xbox just RROD
and I'm not happy. The warranty is void cause I've opened it up already, so I'm on my own for this one. My error code is 0110 which is Memory Error/Memory Overheating.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
They might not take mine even without a warranty. I've got all sorts of leads and resistors soldered on to the MB. When I get home today I'll open it up and try the penny trick to see if they're just overheating. If that doesn't work, I'll bake the MB to remove any moisture.
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
So I took it apart tonight and sure enough there'* a problem with the RAM
VeQO9.jpg
But where did all this moisture come from? My guess is the heat pads because it'* only the memory modules on the bottom of the board and the moisture is sticky like glue.
Anyway, I'll throw it in the oven tomorrow to evaporate any moisture and put it back together with my fingers crossed.
VeQO9.jpg
But where did all this moisture come from? My guess is the heat pads because it'* only the memory modules on the bottom of the board and the moisture is sticky like glue.
Anyway, I'll throw it in the oven tomorrow to evaporate any moisture and put it back together with my fingers crossed.
#8
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
#10
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
No... I just fixed it. EDIT: Oh, the video isn't finished processing yet.
Yea, there was moisture under the memory modules shorting them out. That'* why a 0110 code was thrown. It took 25 minutes at 300* in the oven to get it working again.
Yea, there was moisture under the memory modules shorting them out. That'* why a 0110 code was thrown. It took 25 minutes at 300* in the oven to get it working again.