Lounge For casual talk about things unrelated to General Motors. In other words, off-topic stuff. And anything else that does not fit Section Description.

Working on the Furd

Thread Tools
 
Old 10-23-2010, 03:52 PM
  #1  
Retired Senior Admin

Expert Gearhead
Thread Starter
 
Danthurs's Avatar
 
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes on 24 Posts
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default Working on the Furd

Well, picked up the winter beater/work truck yesterday. I jumped in and started off, Oh, low on gas, no big deal. I run to the station to fill up. Hmm, 2 tanks. I'll fill the front one. So I put $20 in. And off I go to the DMV to register it. I get out, I smell gas. Look under the truck and I see gas dripping on the ground and a small puddle starting. Dang, tank has a leak. So I drive back home and siphon out the tank and dump it in the rear tank. I flip the switch, looks good. I then need to drive out to Plymouth, about 20 miles or so to give a body work estimate. I make it almost there and I turn off the highway. The truck sputters and dies. Oh oh. Not good. I look it over, try to restart a few times. No good, now I have a dead battery. I call my wife. She'* not happy. I call the guy I'm coming to see and tell him I'm not going to make it. A little later, he shows up to help. By this point I have done some road side diagnostics.

I was able to remove the fuel filter without tools, now there'* a great idea. I flipped on the fuel pump, no gas comes out. WTF. So I crawl under there again and put my hand on the tank. I can feel the fuel pump running in the front tank. I then slide back, the rear fuel pump is not running. So all my gas is in the rear tank, and that pump is not running. Nice. I get a can of gas, put some in the front tank and off I go.

Get home, still dripping. Darn it. So today I figure I better fix it. Pulled it in the shop and up on the ramps.
DSC02575.jpg

I then siphoned all the gas out of the rear tank.
DSC02576.jpg

I undid the tank strap.
DSC02577.jpg

I then added fuel to the front tank until I saw this wet spot starting.
DSC02578.jpg

Siphoned out the gas and cleaned up the area a bit.
DSC02579.jpg

I don't know, did I really need to put it up on ramps?
DSC02581.jpg

Picked up some quicksteel, it'* a epoxy putty, worked really well.
DSC02583.jpg

So I get everything back together, all the time thinking, that was a very small hole for all that gas to leak from. But it was the only wet spot. I also filled the tank again and found no leaks. So I cleaned up the shop and was very happy with myself. Until I drove the truck off the ramps. I moved the ramps out of my way and pulled back in. I could smell gas. Looked under and there'* a puddle and a fairly steady stream of gas running down. So I quick start siphoning the gas again and then drop the strap and pull the tank down. This leak aint getting away this time. Found it.
DSC02584.jpg

Looks like the tank had rubbed up on the frame and rubbed a nice 1 inch gash.

Cleaned it up, patched it, put some rubber padding in there and bolted it all back up. Filled the tank to 3/4 and no leaks. Right now I'm thinking about just buying a new tank, autozone has them for $120. I figure it'* a few hours, no big deal.
Old 10-23-2010, 04:25 PM
  #2  
Artist
True Car Nut
 
yutzybrian's Avatar
 
Join Date: Jul 2009
Location: USA
Posts: 5,283
Received 49 Likes on 36 Posts
yutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to behold
Default

Looks just like my brothers old truck that'* sitting next to the driveway except his is primer gray

Old pic but the only one I have with it in
Old 10-23-2010, 05:21 PM
  #3  
Senior Member
True Car Nut
 
Jonpro03's Avatar
 
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes on 0 Posts
Jonpro03 is on a distinguished road
Default

Rust!!!
Old 10-23-2010, 05:29 PM
  #4  
Artist
True Car Nut
 
yutzybrian's Avatar
 
Join Date: Jul 2009
Location: USA
Posts: 5,283
Received 49 Likes on 36 Posts
yutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to behold
Default

Originally Posted by Jonpro03
Rust!!!
That'* a veryyyyy common spot on those F150s for rust. I'm not even sure there would be a way to prevent it without completely tearing apart the panel, undercoating the backside, and sealing the trim strip around the wheel well
Old 10-23-2010, 05:42 PM
  #5  
Retired Senior Admin

Expert Gearhead
Thread Starter
 
Danthurs's Avatar
 
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes on 24 Posts
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

I don't believe I've even seen a F150 that old without rust around the rear tires. Most are far worse. Besides, I'm more interested in a sold engine and drive train. I do need to fix something on the front suspension that I didn't notice. There'* a brace behind the front suspension that mounts to the frame. The bracket on the frame is broken and the brace is held in place by a chain. I don't like that. All I need is that bracket and then I remove 1 bolt, and cut out 4 rivets and I bolt in the new one. I just need to figure out the name of it and find one. Might need to visit the salvage yard.
Old 10-23-2010, 05:43 PM
  #6  
Senior Member
True Car Nut
 
MouSe's Avatar
 
Join Date: Oct 2009
Location: Atlanta
Posts: 5,988
Received 4 Likes on 4 Posts
MouSe is on a distinguished road
Default

Hey Dan, why aren't those rear wheels chocked? You trying to kill yourself?
Old 10-23-2010, 05:44 PM
  #7  
Retired Senior Admin

Expert Gearhead
Thread Starter
 
Danthurs's Avatar
 
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes on 24 Posts
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

In gear, parking brake on, and on the ramps it don't roll back.
Old 10-23-2010, 06:02 PM
  #8  
Senior Member

True Car Nut
 
sseidriver97's Avatar
 
Join Date: Mar 2010
Location: Portage mi
Posts: 7,124
Received 5 Likes on 5 Posts
sseidriver97 is on a distinguished road
Default

Well not to bad hopefully you didnt pay a whole lot for it and looks like it will make a decent winter beater
Old 10-23-2010, 06:03 PM
  #9  
Senior Member

True Car Nut
 
sseidriver97's Avatar
 
Join Date: Mar 2010
Location: Portage mi
Posts: 7,124
Received 5 Likes on 5 Posts
sseidriver97 is on a distinguished road
Default

dopes it have the straight 6...302 or 351???
Old 10-23-2010, 06:32 PM
  #10  
Retired Senior Admin

Expert Gearhead
Thread Starter
 
Danthurs's Avatar
 
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes on 24 Posts
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

I got it for a grand. Which is not a great, but still a good price around here for a 4x4. And it has a 302


Quick Reply: Working on the Furd



All times are GMT -4. The time now is 02:14 AM.