changing the brake shoes on my 1989 gmc r3500 for the first time
#1
Senior Member
Posts like a 4 Banger
Thread Starter
changing the brake shoes on my 1989 gmc r3500 for the first time
ive been reading online and most people say to put the bigger shoe on the back but when i removed my drum i noticed that the smaller one was on the back.so i was wondering should i reverse them or install the exactly like the old ones are?
#2
Senior Member
True Car Nut
Install exactly like the old ones. When I do a brake job on a car I have never worked on before I take a picture of how things look before I remove anything so I can make sure it looks the same when I am done.
Perhaps the big shoe is on the rear on one side, and on the front on the other, which might be the source of the confusion. In any case, put it back like you found it.
Perhaps the big shoe is on the rear on one side, and on the front on the other, which might be the source of the confusion. In any case, put it back like you found it.
The following users liked this post:
wes104 (12-05-2015)
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Install exactly like the old ones. When I do a brake job on a car I have never worked on before I take a picture of how things look before I remove anything so I can make sure it looks the same when I am done.
Perhaps the big shoe is on the rear on one side, and on the front on the other, which might be the source of the confusion. In any case, put it back like you found it.
Perhaps the big shoe is on the rear on one side, and on the front on the other, which might be the source of the confusion. In any case, put it back like you found it.
Last edited by wes104; 12-05-2015 at 03:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post
wes104
GMC/Chevrolet Truck/SUV
2
09-17-2015 05:03 PM
wes104
GMC/Chevrolet Truck/SUV
8
04-07-2014 09:57 PM