blue smoke on startup on my 2010 gmc sierra 2500hd
#1
blue smoke on startup on my 2010 gmc sierra 2500hd
My 2500 hd 6.0l when starting up for the first time blows a cloud of blue smoke out..it only has 30,000 miles on it??????
#2
Senior Member
Certified GM nut
Copied into its own thread for better visibility, and because this is a separate topic. No worries.
We had a member just yesterday solve that same issue on his Bonneville. Check your PCV valve and its housing. If you should have a spring and an O-ring, make sure they're there and not damaged.
We had a member just yesterday solve that same issue on his Bonneville. Check your PCV valve and its housing. If you should have a spring and an O-ring, make sure they're there and not damaged.
Last edited by SignOfZeta; 03-30-2011 at 03:50 PM. Reason: Typing error.
#3
bbdram4u,
have you had the chance to take the vehicle into your local dealership to be diagnosed? Please keep me posted if the issue has been taken care of.
Thank you,
Caron, GM Customer Service
have you had the chance to take the vehicle into your local dealership to be diagnosed? Please keep me posted if the issue has been taken care of.
Thank you,
Caron, GM Customer Service
#4
Senior Member
Posts like a Supercharger
Join Date: Aug 2009
Location: Wahpeton, North Dakota
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a diesel engine, if it is check the PCV and also make sure that the fuel regulator is not leaking because that can cause leaking deisel to ignite creating the puff of blue smoke. I hope this helps
#7
Senior Member
True Car Nut
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
#10
On the majority of the smoke on start up problems on the LS series engines ( 4.8 5.3 or 6.0 ) you will find that the drivers side valve cover is the problem. This engine does not use a pcv valve like the earlier engines. On my 2004 6.0 (406K miles) it would smoke every start up for a week and sometimes not smoke at all. It also would smoke worse at times when it was parked at odd angles. When you inspect the valve cover it will most likely appear to be okay (You can blow through it) but the channels and baffles behind the metal plate that go to the drain holes are becoming clogged allowing oil mist to puddle inside the valve cover passages. You will also find oil puddled inside the intake. It is hard to clean these passages, but it can be done. The soak type carb cleaners and compressed air work best. There is a 1/8 hole right below the pcv port on the inside of the cover that is one of the main problems. On 2008-2010 engines GM has an improved cover you can use. Hope this helps