GMC/Chevrolet Truck/SUV When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made.

97 GMC Sierra starting problem

Thread Tools
 
Search this Thread
 
Old 06-26-2011, 05:20 PM
  #1  
Junior Member
Thread Starter
 
bluepen2's Avatar
 
Join Date: Jun 2011
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
bluepen2 is on a distinguished road
Default 97 GMC Sierra starting problem

Hi, I have a 1997 GMC Sierra (5.7 L). I use the truck every day, but once every two weeks or so it won't start. I just get one click. If I wait a little while (15 sec to 15 minutes) and try to start it, it starts perfectly. After it starts, the engine runs great.
The battery is 3 years old.
The starter is 2 years old.
What could be the problem? Any help is much appreciated.

Thanks.
Old 06-26-2011, 08:40 PM
  #2  
Senior Member
True Car Nut
 
jwfirebird's Avatar
 
Join Date: Dec 2009
Location: western,ny state
Posts: 9,616
Received 579 Likes on 497 Posts
jwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond repute
Default

i would start with cleaning all your big wire connections and grounds, on my gmc the braided strap that goes from the pass side engine to the frame fell apart when i touched it. look for loose wires too
Old 06-26-2011, 09:52 PM
  #3  
Member
Posts like a V-Tak
 
franklin cardona's Avatar
 
Join Date: Jun 2011
Location: pennsylvania
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
franklin cardona is on a distinguished road
Default

I had a similar problem with my car and I changed the plugs,ignition cables and ignition module,air filter and a radiator flush . 2 coolent sensors ,5 different relay swithes , vacuum hoses ,o2 sensor , fuel filter and still had the problem ... when I changed out the air flow sensor and PCV it was good to go ....I had gotten that tip here from this web site.. good luck
Old 06-27-2011, 11:14 AM
  #4  
Senior Member
True Car Nut
 
jwfirebird's Avatar
 
Join Date: Dec 2009
Location: western,ny state
Posts: 9,616
Received 579 Likes on 497 Posts
jwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond reputejwfirebird has a reputation beyond repute
Default

maf wouldnt cause the starter to not work
Old 06-27-2011, 10:37 PM
  #5  
Senior Member

True Car Nut
 
sseidriver97's Avatar
 
Join Date: Mar 2010
Location: Portage mi
Posts: 7,124
Received 5 Likes on 5 Posts
sseidriver97 is on a distinguished road
Default

As a guy who has dealt with this on two of the same trucks yes check that braided strap the one on my wifes truck also crumbles as i grabed it Also check the connections on your starter..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
klym
GMC/Chevrolet Truck/SUV
8
02-07-2015 06:47 PM
Zolo
GMC/Chevrolet Truck/SUV
8
04-23-2014 06:55 AM
nightriderr
GMC/Chevrolet Truck/SUV
4
11-10-2011 07:17 AM
nightriderr
GMC/Chevrolet Truck/SUV
5
10-22-2010 07:44 PM
Tamara
General GM Chat
6
12-31-1969 07:00 PM



Quick Reply: 97 GMC Sierra starting problem



All times are GMT -4. The time now is 03:46 AM.