new here new to gm
#1
Junior Member
Thread Starter
Join Date: Oct 2010
Location: carbon county pa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
new here new to gm
Well first off I'm Brian,my truck is an 84 gmc sierra 2 whl drive 305( I think) this is not the original motor or trans , the trans is 3spd with overdrive automatic. My first question is how can I tell what motor it is.I'm not a gm guy so its all new to me , the truck has treated me well and is in decent shape but the drive train is slowly dieing. I have no idea what is inter changeable or what years will work as in the motor and trany department.So I will start with motor identification then what year or years v8 can be put in , like a 350 , this will be the first of many question so bare with me, thanks.
#3
Administratus Emeritus
Certified Car Nut
You need a Casting code to tell you anything, This Casting number is usually found at the rear of the block on the left or drivers side on top of the bellhousing flange. Find the number, then go here. http://www.chevy-camaro.com/chevy-ca...es.asp?group=1
#7
Junior Member
Thread Starter
Join Date: Oct 2010
Location: carbon county pa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
cool beans thanks for the replies, no pics off the truck not very pretty hoping to get some body work done on ti ,it deserves it , its treated me well.
Thread
Thread Starter
Forum
Replies
Last Post
chambiec1
Introductions for new members
20
08-29-2007 09:34 PM
Bonneville92V688
Lounge
47
08-24-2007 05:09 PM