FOB part number
05-24-2007, 07:37 AM
#2
Junior Member
Posts like a Ricer Type-R
05-24-2007, 09:57 AM
#4
Junior Member
Posts like a Ricer Type-R
If you do in fact have AUO on your label, and you KNOW it'* the original label (match the VIN), all the pieces should be there unless removed at some earlier date. I don't recall ever hearing of a GM RKE reciever dying, so your odds are pretty good. Sounds like a good 30 buck gamble to me.
05-24-2007, 10:01 AM
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2007
Location: Dallas (Lewisville), TX
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I'm going to try the reprogram steps outlined here:
http://programyourremote.com/
If the doors lock and unlock, it will be in program mode and then I'll know if it'* equipped.
http://programyourremote.com/
If the doors lock and unlock, it will be in program mode and then I'll know if it'* equipped.
05-24-2007, 10:06 AM
#6
Junior Member
Posts like a Ricer Type-R
Originally Posted by Kimbo
Yeah, I'm going to try the reprogram steps outlined here:
http://programyourremote.com/
If the doors lock and unlock, it will be in program mode and then I'll know if it'* equipped.
http://programyourremote.com/
If the doors lock and unlock, it will be in program mode and then I'll know if it'* equipped.
We KNOW our procedure works. Some out there may not. You may either want to compare our instructions to theirs, or simply use ours for safety'* sake. If you ground the wrong pins, you can smoke your PCM.
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
Lounge
1
03-13-2010 02:36 PM
SSEimatt93
General GM Chat
1
07-04-2003 12:42 AM