Got my MSD Coils!
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Nov 2003
Location: Philly, PA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Got my MSD Coils!
I finally got around to ordering MSD coils for my car, and they were delivered today. I was looking at one of the papers that came with them and on the picture it shows another MSD thing that goes under each coil. Do I need those too??
#2
Junior Member
Posts like a Ricer Type-R
That'* the coil adapters for the DIS-4 ICM. You don't need them unless you go with the full system. They'll bolt right onto your existing ICM just the way you got them.
Hint.....do one coil at a time so you don't lose track of which wire is which. Leave the wires hooked to the old coil, pull it, install the MSD, then move the wires to the MSD. Repeat for each coil
Hint.....do one coil at a time so you don't lose track of which wire is which. Leave the wires hooked to the old coil, pull it, install the MSD, then move the wires to the MSD. Repeat for each coil
Thread
Thread Starter
Forum
Replies
Last Post
parallelcircuits
Performance, Brainstorming & Tuning
22
05-18-2003 02:02 AM